Jib Crane help, information and questions you need to ask.

Common questions about jib cranes/swing jibs/pillar jibs/slew boom jibs.

AG Cranes are probably the UK largest independent jib crane suppliers and installers. Most months we sell and or install between 10 and 14 jib cranes.

Usually customers have questions they need answering before they can specify or place an order for a swing jib crane. Even though a brand new pillar jib cranes including an electric chain hoist can start from under £1500.00 the pillar crane you purchase needs to be right and meet your needs and requirements.

So before ordering a jib crane please take a moment to read about the questions we get most frequently asked. If you need to call us our jib crane advisers; Chloe (the clever one), Laurie (a bit ditsy), Tristan or Alan will be only too happy to help.

Please remember jib cranes can lift large heavy weights high into the air and overhead; if done incorrectly it can be a dangerous piece of equipment. At AG Cranes Ltd we want you and your employees to be safe and productive.

To quote you a swing arm jib crane we will need to know:

1. The SWL, or safe working load you need to lift. Example 500kgs.

2. The height you need to underside of the jib arm or lift height from the floor. Example 2.5 meters.

3. The arm length needed to swing the load. Example 3 meters.

4. The height of any overhead obstructions: Example roof lights at 4.2 meters.

Once our team of fully trained experts have the information we will be able to give you a quotation based on what your needs are.

Every AG CRANES quotation will feature the jibs SWL, the overall height of the jib, the floor to underside of the jib crane, the hook at it's highest point and the jib cranes arm length.

The Factory Floor To Support the Jib Crane. Will it take it......

Most customers ask us about the floor depth required to support the new jib crane. You must remember your jib crane supplier cannot guarantee your factory's floor depth or suitability. As an example of bolt embedment depth an M20 bolt will need 170mm, while an M24 requires 210mm.

When installing a new or used swing jib crane you have four choices when it comes to your workshop floor:

Option 1: Fit an extra large or oversized base plate the most common and popular choice. For our new Donati jibs we can supply an extra large base plate to fasten to the factory floor. The large jib base bolts to the floor with 8 or 12 bolts. The jib cranes pillar is then bolted to it. The oversized base plate comes pre-drilled to accept the jib pillar/column. More details on the oversize jib base.

1 tonne pillar crane base

Option 2: Dig a pit and fill with it concrete, leave it to cure for a couple of weeks, and then fit the jib on top of the new floor base. This is popular with used jib cranes or other makes other than Donati.

Option 3: If digging a large pit/base for our new Donati jib cranes we can supply you a set of ground anchors, or "J bolts". (See below), this is by far the safest option for new pillar cranes. The ground anchors, or large "J bolts" sink into the factory floor base you have prepared. Before filling the base with concrete of the required grade, you need to insert the ground anchors with the jib base template and leave the tops of them around 100mm proud of the hole. Once it has gone off the jib crane lands straight on to the anchors and is tightened up. This usually takes two or three weeks to go off. Once it has gone off we can then land the jibs column onto the protruding ground anchors before commission and testing takes place. Ground Anchors: More details.

J bolts for cranes

Option 4: Do nothing and hope the floor will take the load and over turning moments imposed when installed and tested! Please remember the floor is always the clients responsibility. All that we ask is if it fails the proof load test is that you pay us! Seriously at 500kg SWL or above we will always "ask how deep is your factory floor before installation."

jib crane without oversized base plate

On arrival if the floor depth is not the correct depth the engineers will consult with you and our office. If you wish them to carry on you will be asked to sign the install engineers site sheet taking responsibility.

USED jib cranes, testing, certifying, installation warranty etc.

Many companies in the current climate want to save money. At AG Cranes Limited we are often asked to supply used jib cranes or used jib cranes with new hoists as a compromise. We will still offer a warranty on used jib cranes, as well as a test certificate if we carry out the installation.

If you want a new electric chain hoist on the used jib crane that you purchase to help to keep the costs down we can offer this and are only too happy to quote both options. Though cheaper used jib cranes "are what they are" as we often say in terms of dimensions. With new jib crane we can make them to your exact dimensions.

We cannot offer ground anchors or extra large base plates pre-drilled for our used jib cranes; unless we know what make it is. Luckily however when buying a used jib crane it will nearly always have a base plate large enough already on it, as it will have been used elsewhere previously.

There will always be differences between the depth of two factories floor; if you are in doubt you should consult a local civil engineer.

If purchasing an AG Cranes Jib Crane we include the following;

  • The jib cranes pillar or column.
  • The jib cranes arm, underbraced or over-braced in style.
  • A 3 phase 415volt electric chain hoist (ECH), Lifting speeds 1 or 2.
  • A manual hand push travel trolley to suit the jib's hoist.
  • An SWL (safe working load sticker) and serial number.
  • Electrical power cable kit: On / off switch, festoon trolleys, the festoon cable or strainer wire for the jib cranes arm. £99.00 if bought separately; Free if purchased with one of our jib cranes.
  • A warranty of up to 3 years depending on the hoist purchased.
  • All you need is 3-phase 415 volt electricity supply.

Install commission and test. Enter for Install info and help.

Click for jib crane electrical requirement information.

Test Weights; to view enter here.

Click for the UK's best Pillar jib crane prices

Please call today our Jibettes Chloe or Tristan for free advice.

AG Cranes Ltd always offer installation, commission and test as an option when jibs are purchased.

Call us on; 01527 854 600 for more info.
 

Contact us